Selina jr.

€ 650.000,-
967x viewed

General info

Folio No.
3230
ENI number
03051709
Type
Hopper barge
Dimensions
67,04 m x 8,22 m
Draught
3,05 m
Tonnage
972 t
Year built
1965
Shipyard
Werf van Nugteren in Irnsum
Certificate of Research
ILenT (SI) Valid until 12-2023
Airdraught without ballast
6,80 m
Airdraught with ballast
4,60 m
Welded / riveted
Welded
Year bottom
2016
Details
The current work can be continued on request.
Supplier Conditions
Indien gewenst op korte termijn
Note
The Selina jr is a self-suctioning dredger/barge.

Youtube Other link


Download leaflet

Engine Room

Main engine

Brand and type
Caterpillar 3408
Power
482 hp
Year built
1982
Total running hours
48829 (per feb 2022)
Running hours after overhaul
3829 (per feb 2022)
Year of overhaul
2020
Gearbox
Reintjes WAF 360 2007


Nozzle
Nee
Propeller size
140 cm
Gasoil tank rear
11.500 liter
Water tank rear
5.000 liter
Note
Main engine Caterpillar 3408 completely overhauled in 2020.
Grease lubricated propeller shaft (1997)
CuNiAl 4-blade Lips propeller, diam. (1997)

Engine room bow

Bow thruster

Engine
DAF 1160; 2000 RPM met ZF clutch
Type
Manufacture Verhaar, cross-pipe installation with vertical screw.
Power
260 hp

Gasoil tank front
3.800 liter
Water tank front
500 liter

Generators

Generators

Type
Yanmar/Brinkmann & Niemeijer (in sound-insulated cabinet)
Power
41 kVA
Year built
2010
Operating hours
39908 (per feb 2022)

Generators 2

Type
John Deere met Stamford generator
Power
70 kVA
Operating hours
49696 (per feb 2022)

Midship

Number of holds
1

Cargo hold

Dimensions
35,05 x 4,51 m
Thickness of floor
10 mm
Cargo hold floor
Steel
Walls
Semi-beun

Total cargohold capacity
612 m3
Note
Holds newly installed in 2000.
Hold floor: steel, thickness 10 mm with 6 longitudinal strips (year 2000 new)
Hold walls: steel, thickness 9 mm, partly with slanting (2000 new)

The 16" steel suction pipe is 23 metres long and fitted with a drag head and a stitch head (2014);
14" steel pressure pipe (square) above loading hold with channels
Hydraulically operated crane midships for suction pipe (2011 overhauled)
Bow: hydraulically operated trestle for suction pipe (2011 revised)
Hydraulically operated wire winch for moving the suction pipe up and down on the foreship

Wheelhouse

Wheelhouse type
Overzakbaar aluminium
Air Conditioning
Overhangable aluminium
Nautical equipment
Radar installation, GPS, AIS, Cameras, VHF, Automatic Pilot, Navigation software, Rudder position and turn indicator, Compas/elect. compas, Tachograph, Depth sounder, Loudspeaker/intercom/portables, Nautically complete,
Note
Tresco dredging system and Tresco track pilot newly placed 2021 Gps new placed 2021

Others

Steering gear
2 Balansroeren van 2014 en 2019.
Pumps
3" deck wash pump (2019) / 4" Gorman Rupp drainage pump with timer / 3" Gorman Rupp bilge pump /4" Gorman Rupp ballast/bilge pump (2015) / Victor gland pump, type S40G31T with flow meter / IHC sand pump driven (2010 overhauled) by GM diesel engine, type 16V71 with Allison clutch and Stork centrifugal pump, cap. 1500 m3/h / 6" Spyflow/Johnson centrifugal jet pump (2019) driven by DAF diesel engine, type DK 1160 (DAF in 2018 partly overhauled; 2019 moved to foreship, including new pipes etc.)
Note
The entire dredging system is from IHC.

Living

Number of bedrooms
3
Description living area
Living room, 3 bedrooms, kitchen, bathroom with shower and WC.
Air Conditioning
Yes in living

GTS does not accept any liability for any inaccuracy of information provided.