Specter - GTS Schepen

€ 2.300.000,-
2317x viewed

General info

Folio No.

3586

ENI number

02321028

Type

Motor freighter

Dimensions

110,00 m x 11,40 m

Draught

3,50 m

Tonnage

3.006 t

Tonnage on 2.20

1.466 t

Tonnage on 2.50m

1.816 t

Number of TEU

255

Year built

1993

Shipyard

Societatea Comerciale Navol S.A., Oltenita, Romania

Certificate of Research

ILenT (SI) Valid until 01-2029

Supplementary certificate

ADN, Donau certificate, Suitable for Rhine shipping, Push Certificate,

Airdraught without ballast

6,00 m

Airdraught with ballast

4,75 m

Welded / riveted

Welded

Supplier Conditions

n.o.t.k.

Note

204 TEU (on 4 layers), 255 TEU (on 5 layers)

Crawl height with ballast is 4.75 m on 2.50 m draught (ballasted)

Additional ballast tanks in the bow and stern and side berths making ballast possibilities large, with dry hold and empty can sail with 1.40 m draft.

Download leaflet

Engine Room

Main engine

Brand and type

Caterpillar 3516 STD

Power

1.835 hp

Year built

1992

Total running hours

109100 (per 02-2024)

Running hours after overhaul

42100 (per 02-2024)

Gearbox

Reintjes WAF 860; Year of construction 1992

Nozzle

Present, incl. spoiler

Propeller size

185 cm

Gasoil tank rear

48.000 liter

Water tank rear

20.000 liter

Note

2021:
- New propeller shaft outer bushing with Special HML Layer + seals outside. Propeller shaft inner bushings are on reserve
- Pilot Rate-of-turn indicator Depth sounder + New cables
- Cylinders Steering overhauled + new hoses and bearings

2022:
- Engine room entrance insulated and insulation opening Wheelhouse-column wheelhouse

Oil samples main engine and checklists/repair lists on board.

2023:
- All hoses aft Main engine replaced
- Power box stern completely renewed with Automatics

Engine room bow

Bow thruster

Engine

Caterpillar 3408

Type

Veth canal system

Propeller size

120cm

Power

535 hp

Year built

1993

Operating hours

500 hours after overhaul. Total running hours 26500 hours

Gasoil tank front

4.900 liter

Water tank front

5.000 liter

Note

2022:
- All exhausts engine room foreship fitted with New mattresses and gaskets
- Complete overhaul Cat 3408 + hoses/gaskets.
- New exhaust pipes fore ship galvanised

Generators

Type

John Deere (foreship)

Power

40 kVA

Year built

1993

Operating hours

40000 (per 04-2024)

Generators 2

Type

John Deere (foreship)

Power

60 kVA

Year built

1993

Operating hours

19500 (per 04-2024)

Midship

Number of holds

1

Cargo hold

Dimensions

80,20 x 10,13 m

Thickness of floor

12 mm

Cargo hold floor

Steel

Walls

Double-walled

Total cargohold capacity

3.800 m3

Hatch covers

Friese kap stacking hatches

Cradle (hatch)

Instalho

Note

The hold is fitted with 2 sand channels in the side bows.

2021:
- All ball valves deck wash replaced with ADN fire hydrants with cover.

2023:
- Approx. 150 pro welds gouged out and fully re-welded
2024:
- Minor overhaul hatch carriage ( wheels, motors, pipes)

Wheelhouse

Wheelhouse type

Spacious wheelhouse with Aluminium cantilevered superstructure. The lifting column is suitable for 5-high containers (viewing height 16 metres).

Nautical equipment

Radar installation, GPS, AIS, Cameras, VHF, Automatic Pilot, Navigation software, Rudder position and turn indicator, Compas/elect. compas, Cargo gauge,

Note

2021: - Control console foreship and 2-wire steering + control lever wheelhouse Veth Propulsion - 3-bulb GPS compass - Wind indicator Alphatron - New Radar Alphatron 611 + 2 screens + new panelling in wheelhouse 2024: - Adjusting Cameras + new blackbox and 4 x extra cameras and controls - New Camera screens above console

Others

Steering gear

Hydraulic steering system with 2 rudders, manufacture Van der Velden.

Pumps

Aft: Jet system 1000m3/hour, Ballegooye (de Groot) , Ballast pump 300m3/hour, 1 deck wash pump, 1 coarse waste pump. Foreship: Veth ballast system via 2x 10" pipes), Vacuum pump serving sand channels.

Anchor winches

Foreship; Double-acting oil-bath winch with 2 nesting discs and 1 rope drum, manufactured by C. Kraayeveld B.V. Aft: Single-acting oil-bath winch with 1 nesting disc and 1 rope drum, manufactured by C. Kraayeveld B.V. Both winches are equipped with new stainless steel catches.

Ship’s crane

Merk: Jooren
Lengte: 13 m
Bouwjaar:
Max. gewicht: 1.500 kg

Spud pole

13.70-metre spud pole, Leeuwestein manufacture

Note

2021:
- Stainless steel cable pipe for cameras, Stainless steel grilles stern lockable
- Stainless steel wing for saucer and stern lights
- New 1000m3 ballast jet manufactured by 'De Groot
- New Winch Auto Crane 2000 kg.

2022:
- Spud pole 13.70 4x extendable with 17'' 2 wire computer in wheelhouse for operation of Ballast jet and Spud pole
- Stainless steel rope pots fore and aft
- Stainless steel cover Forepeak

2023:
- Hewa deck wash pump 11KW

Living

Number of bedrooms

4

Description living area

Hall with access to stairs to wheelhouse, bedroom 1 with double bed, bedroom 2 with single bed, Stuurmans living/bedroom with kitchenette and bathroom with shower and toilet. The corridor leads to the bathroom on SB, incl. shower which has been completely renewed. There is a separate toilet and further down the corridor a bedroom 3 with fixed single bed, End of corridor gives access to the living room across with an open, spacious kitchen.

Living area front

2 bedrooms (1 double bed, 1 bunk bed) spacious kitchen and living room

Air Conditioning

In all accommodation

Note

2021:
- New floor with underfloor heating aft of house
- New air conditioning in front; 3 indoor units +1 outdoor unit

2022:
- Complete new bathroom in front of ship with new washer + dryer
- Kitchen in front of ship renovated with new sink + cupboard doors and kitchen table
- New Airco aft house; 3 x indoor units 1 x outdoor unit; Pipes in wall renewed

2024:
- New bathroom + new toilet + underfloor heating Aft ship