Tyda-Kyra

Under option


1341x viewed

General info

Folio No.
3316
ENI number
02329503
Type
Motor freighter
Dimensions
135,00 m x 11,45 m
Draught
3,76 m
Tonnage
4.202 t
Tonnage on 2.50m
2.338 t
Year built
2008
Shipyard
Yizheng Jianghai Shipping Fixing & Producting Co Ltd.
Certificate of Research
ILenT (SI) Valid until 16-01-2025
Supplementary certificate
ADN, Suitable for Rhine shipping,
Airdraught without ballast
7,10 m
Welded / riveted
Welded
Year bottom
2008




Download leaflet

Engine Room

Main engine 1

Brand and type
Mitsubishi S12R MPTK
Power
1.278 hp
Year built
2007
Total running hours
BB 36000 (per 2022)
Gearbox
Reintjes WAF 665


Main engine 2

Brand and type
Mitsubishi S12R MPTK
Power
1.278 hp
Year built
2007
Total running hours
SB 36000 (per 2022)
Gearbox
Reintjes WAF 665


Nozzle
Damen, type Van de Giessen Optima 2007
Propeller size
1700 cm
Gasoil tank rear
80.000 liter
Water tank rear
18.600 liter

Engine room bow

Bow thruster 1

Engine
Mitsubishi S6A 3MPTK
Type
Veth 4 canal system
Propeller size
120cm
Power
598 hp
Year built
2007
Operating hours
SB 7400 (per 2022)

Bow thruster 2

Type
Propeller size
120
Type
Veth 4 canal system
Propeller size
120 cm
Power
598 cm
Year built
2007
Operating hours
bb 7400 (per 2022)

Gasoil tank front
10.200 liter
Water tank front
9.100 liter
Note
As an extra, the vessel is equipped with 2 hydraulically lowerable bow rudders.

Generators

Generators

Type
John Deere 4045TF (front engine room)
Power
62 kVA
Year built
2018
Operating hours
28000 (per 2022)

Generators 2

Type
John Deere 4045TF (main engineroom)
Power
62 kVA
Year built
2007
Operating hours
12000 (per 2022)
Note
Both generators are set up in soundproof enclosures and equipped with bunk cooling.

Midship

Number of holds
1

Cargo hold

Dimensions
103 x 10,12 m
Thickness of floor
10 mm
Cargo hold floor
Steel grade 52
Walls
Double-walled

Total cargohold capacity
4.530 m3
Hatch covers
Friese kap stacking hatches
Cradle (hatch)
2007
Note
Aluminium profile hatches, make Blommaert with hydraulic hatch crane.

Wheelhouse

Wheelhouse type
Steel panelled substructure with hydraulically sagging aluminium superstructure with double-glazed windows, make EBR.
Air Conditioning
Ja
Nautical equipment
Radar installation, GPS, AIS, Cameras, VHF, Automatic Pilot, Navigation software, Rudder position and turn indicator, Compas/elect. compas, Tachograph, Clinometer, Depth sounder, Loudspeaker/intercom/portables, Fuel consumption meter, Engine data display, Cargo gauge, Nautically complete,
Note
The wheelhouse is hydraulically adjustable in height, up to a viewing height over 5 layers of containers. Furthermore, the wheelhouse is equipped with a U-shaped lectern with top console, sitting area, desk, inside entrance, sun screens, flushing block, mirrors (4 pieces, heated and electrically adjustable), underfloor heating and air conditioning. Navigation mast: mounted on the wheelhouse substructure a hydraulically lowerable, aluminium radar mast, made by Beerens, equipped with antennas, radar, satellite dish, deck and navigation lights. Navigation wing: Beerens-built navigation wing, fitted with deck and navigation lights, mounted at the stern of the deckhouse.

Others

Steering gear
hydraulic, make Promac, with pump on both gearboxes, 380-volt auxiliary pump and 24-volt emergency pump. Rudders: 4 double-position profiled rudders, made by Promac.
Pumps
see explanation below
Anchor winches
Fore: double-disc closed oil bath winch with one rope drum, make Dijvler, driven by a 380volt electric motor, with two Pole anchors and two short link chains. Aft: wire winch with one rope and one wire drum, make Dijvler, driven by a 380volt electric motor, with one Pole anchor on a steel wire.
Ship’s crane
Merk: EBR/Bütter, hydraulic topping, slewing, extending and hoisting. Equipped with radio control and extendible under load up to 18 metres.
Lengte: 11 m
Bouwjaar:
Max. gewicht: 2.000 kg
Spud pole
2 x hydraulic sinking spud pole, make Veth, telescopic extendable, length Aft: 8.50 m. Fore: 10.50 m Bj. 2008
Note
Permanent pumps stern:
- 380volt 4" centrifugal pump, make Desmi;
- 380volt 2" centrifugal pump, made by Desmi;
- 380volt driven ballast jet, capacity 1,200 m3/hour, make Veth.

Permanent pumps fore ship:
- 380volt 3" centrifugal pump, make Desmi;
- ballast line on the bow thruster installation.

Air compressor: 380volt single-stage compressor;

Living

Number of bedrooms
4
Description living area
The accommodation is a flexible and partially sunken steel deckhouse with: a hall with staircase to the wheelhouse, a kitchen with built-in appliances and sitting area, living room, 1x single bedroom, 3x double bedroom, bathroom with bathtub, washbasin cabinet and location for the washing machine and tumble dryer, a toilet. The house is heated by electric underfloor heating, tracing on all windows and air conditioning.
Living area front
The fore accomodation is a partially sunken steel deckhouse with entrance on the starboard side, accessed via a joint entrance with the engine room, which includes: a hallway with washer and dryer set-up and access to the sailors' quarters and pilots' quarters. The sailors' accommodation has a living room with open kitchen, a bedroom and a bathroom, equipped with a shower, toilet and washbasin. The pilots' room is equipped with a living/sleeping area, a bathroom containing a washbasin cabinet, shower and toilet. Both accomodations have electric underfloor heating.
Air Conditioning
In all rooms of the aft cabin and in the sailors' accommodation and the pilot house.
Note
The panelling of the fore and aft aft deck was carried out by Hoogendoorn Maritieme Betimmeringen B.V.

GTS does not accept any liability for any inaccuracy of information provided.